Expenses
Claiming expenses: receipts, journeys and submitting a claim; and setting up the claim period, mileage rates, categories and nominal codes.
Expenses is on when your organisation has the module and you have the Expenses seat. You claim back what you have spent for work; your claim is approved and then exported for your accounts.
Claiming expenses
Expenses in the menu shows your open claim and the claims you have sent. You have one open claim at a time: add to it as you go and submit it when the period ends. The first thing you add opens it.
Adding receipts
Add receipts (top right) opens your photos and files; you can also drag receipts from your computer onto your open claim, several at once. On a phone, choose the camera to take the photo there and then.
Each receipt becomes a line straight away, and AI Assist reads it: the line says AI Assist is reading the receipt… while it does, and you can carry on, or leave the page, meanwhile. When it has read it, the line shows where, the date, the total, the VAT and VAT number when it is a VAT receipt, and a category, marked Suggested:
- Accept if it's right, or Accept all above the receipts for every one it read.
- Change opens the receipt beside its figures. Each figure it read says From the receipt until you change it; save, and it's yours.
- A line marked Check this has figures it couldn't read (often the date or the total): fill them in.
- A receipt it couldn't read says so: Fill in and type the details, or Try again if it was busy.
AI Assist leaves out anything it can't read clearly and never fills in VAT without a VAT number. Paid with, who it was for, the nominal code and the evidence start as your own card, for the company, the category's code and "I have the receipt"; change them under Change when they're different.
No photo at all? Type one in instead gives you the form to fill in. Paid abroad? Under Change, tick Paid in another currency: the original amount is read from the receipt, and the total is what your card was charged in pounds. With AI Assist off for you or your company, every receipt is a line to fill in.
Adding a journey
Add a journey for business miles in your own vehicle: the date, where from and to, and the miles. The amount is worked out at your company's mileage rate from the miles you have already claimed since 6 April, so a journey that takes you past a rate's limit is split across the two rates.
Submitting
Choose the brand you are claiming for if your company has more than one, then Submit claim. It waits until AI Assist has finished reading, and every receipt needs a category and an amount; submitting accepts anything still marked Suggested. Warnings (no receipt added, not allocated, a possible duplicate) don't stop you; your approver and finance see them too. Once submitted a claim can't be changed, and the next thing you add opens a new one. Claims you've sent lists them with where each one has got to; open one to see its lines and receipts.
When it is sent back
If your approver needs a change, they send the claim back with a question: it is your open claim again, with their question at the top. Anything you had started since joins it. Change what they asked and submit it again.
Approving expense claims
A claim goes to the person's own approver, else their line manager, else their department's approvers, else whoever can see every claim; never to the person who made it. You are told in the app and, if you get email for it, by email. It is in your Inbox under For me; Review opens it.
The claim shows each expense, any warnings, and what is owed to them. On a wide screen the receipt shows large beside the expenses, every page of it: choose an expense's small receipt to see that one instead, and Full size opens it in a new tab. Then:
- Approve it whole. It goes to finance to be paid.
- Send back, saying what needs changing. It goes back to them to change and submit again.
- Decline, with a reason. They see the reason.
When a claim goes to several people, the first to decide does it for all of them. What has happened at the foot of the claim lists each step, who took it and what they said.
Paying claims: for finance
Whoever can see every claim and export them (anyone with Finance on their Access, an Administrator, or anyone given View every claim and Export claims) has the Finance tab on the Expenses page. The people with Finance have it in their Inbox too: one item for the approved claims to export, and one for the exported claims to pay, each with how many and how much is owed (while nobody has Finance, the Administrators do). The Finance tab has three tabs:
- To export: approved claims. A claim marked lines need a code has expenses with no nominal code: open it and, under Correct before export, give each one its code. A company with no codes yet sees a note with a link to Settings › Expenses, where you import your chart of accounts or add codes one at a time. You can also change who an expense was for. Anything else, ask the approver to send it back.
- To pay: exported claims. Record paid with the date and the amount. An amount below what is owed needs a reason; the person who claimed sees what was paid, how much short and why on their claim, and is told it was paid.
- Paid.
Choose a brand to see only its claims. Tick the claims to export and Export: this makes three files, kept under Exports to download again at any time.
- Sage 50 import: the transactions to import into Sage 50 Accounts (File › Import › Audit Trail Transactions). Only what is owed to the people claiming is posted; company card and invoiced expenses are left to their own statements. As a journal (the default), each expense is a debit to its nominal code with its VAT (T1 where VAT is reclaimed, T9 otherwise), and each claim a credit to your expenses owed code, dated the day it was approved. As bank payments, each expense is a payment from your bank nominal code. Before your first month end, import one claim into a backup of your company to check it.
- Detail CSV: one row per expense with everything about it, for a spreadsheet. Files from different months can be pasted one under another.
- PDF pack: each claim's summary, then every receipt, captioned.
A claim can be exported again (to make the files again), but not once it is paid.
Setting up expenses
Settings › Expenses is where an Administrator, or anyone given Manage expenses settings, sets the rules. The first time it is opened it fills in a starting point: a calendar month, HMRC's mileage rates and sixteen everyday categories. Change any of it.
Claim period
Each claim covers one period, and an expense goes in the period of the day it was spent.
- A calendar month: everything in October is October's claim.
- Up to a payroll cut-off: with a cut-off on the 21st, 22 September to 21 October is one claim and anything from the 22nd goes in the next. A cut-off later than a short month's last day is that month's last day.
Emails at the close
Both are on until you turn them off, and each goes out once a period, on a working morning.
- Remind everyone who claims: an email a number of days before the period closes (three to start with) to everyone with the Expenses seat, saying when it closes. Anyone with expenses on their open claim not yet sent is told how many. When the day falls on a weekend, it goes on the Friday before.
- Tell finance when the period has closed: an email to the people with Finance (or, with none, the Administrators), on the day the period closes (or the next working day), with how many approved claims there are to export, what is owed, and how many are still waiting for approval. When there are none of either, it isn't sent.
Mileage
What a business mile pays, in bands by how far the person has claimed since 6 April. HMRC's approved rates for cars and vans are 55p a mile for the first 10,000 miles and 25p after; a company that pays one flat rate keeps a single band. Add a band puts another one first. A rate for each passenger is optional; leave it empty if you don't pay one.
Paying above HMRC's approved rate is allowed, but the difference is taxable for the employee.
Accounts
- Fixed asset threshold: a purchase at or over this amount, in a category that can be an asset (hardware, for example), is flagged for your finance team to capitalise. Leave it empty for none.
- Financial year starts in: the month your accounts' year begins, used to group exports.
- Post approved claims to Sage as: a journal (each expense debited to its nominal code and the total owed to the claimant credited to your expenses owed code, settled when you pay) or bank payments straight from your bank nominal code.
Categories
Categories are what people choose for each expense. Each has:
- VAT: whether VAT on it can be reclaimed. VAT never reclaimable is for client entertainment: the VAT is recorded but never claimed back.
- What's needed: a receipt, a receipt or a note why there isn't one, or nothing (mileage needs none).
- Nominal code: where it is posted in your accounts.
- Whether a purchase in it can be a fixed asset.
Archive a category you no longer use. Claims already made keep it, and Restore brings it back. Mileage stays a mileage category: you can rename it and give it a code.
Nominal codes
The codes from your chart of accounts that expenses are posted to. To bring them in from Sage 50, open Chart of Accounts, send the list to Excel, save it as CSV and choose Import from a CSV file. Any file with a code column and a name column works; with no headings the first column is read as the code and the second as the name.
An import adds new codes and renames ones whose name has changed. It never removes a code, so archive any you don't want offered. Add code adds one by hand.